Shop Reference Pack

A printable companion for the bench, for the moments a phone or laptop isn't the most convenient thing to have covered in sawdust nearby. 14 pages, generated directly from this site's own species data and calculator math — never a second, hand-typed copy of the numbers.

What's in it

• A 106-species reference table — density, Janka hardness, radial/tangential shrinkage and the tangential-to-radial ratio for every species covered on this site, across four printable pages, rather than clicking through individual species pages mid-project.
• A wood-movement fill-in worksheet — the same formula used in the wood movement calculator, printed with blank rows so you can work a calculation by hand at the bench when a screen isn't handy.
• A flat-frame miter angle chart — computed miter angles for 3- to 24-sided frames, plus a separate fill-in worksheet with blank rows to record compound-miter (sloped) settings from the angle calculator before you touch the saw.
• Nominal-vs-actual dimension and rough-lumber-quarter charts, and a wood-screw gauge / pocket-hole screw-length reference.
• Blank cut-list templates — a fill-in sheet for required pieces and stock on hand, the same two inputs the cut list optimiser takes digitally, plus a to-scale (1/4" per square) blank grid page for sketching a cutting diagram by hand.
• A formulas-and-sources page citing exactly where every number in the pack comes from.

Format

Delivered as a 14-page PDF, sized for standard letter printing, built to be printed once and kept in a shop binder rather than reprinted per project.

Why it's a separate purchase

The site's calculators and reference pages are free and will stay free — this pack exists for the specific, different use case of wanting the core tables on paper at the bench, without a phone or tablet in reach of glue, finish, or sawdust.