How Much Does A Teak 2x4 Weigh
11.93 lb
- Actual size: 1.5" x 3.5" (nominal 2x4")
- Length: 8 ft
- Species: Teak (40.9 lb/ft³ as milled)
Methodweight = (board feet / 12) x density — board feet computed from the ACTUAL, not nominal, dimension.
Moisture content, and any coating/finish weight, will move the real number slightly — this is the dry, as-milled figure.
A teak 2x4 weighs 11.93 lb over 8 feet — but weight is rarely the number that matters most here, because at teak's typical price of around $45 per board foot, a 2x4-sized offcut represents real money, not a scrap-bin test piece the way a softwood 2x4 would be.
Why this one specifically
Teak isn't sold as dimensional lumber the way SPF is — this figure exists as a cross-species reference point, and the more relevant fact about a teak 2x4 is usually cost, not mass. At roughly $14 for 3.5 board feet of stock at that price level, a piece this size is closer to a boat-fitting offcut than a framing member.
What moves the number
Teak's natural oils, the same ones that make it prized for boat decking, don't meaningfully change its density or this weight figure — they matter for gluing and finishing, not for how much the board weighs. The 12%-moisture reference used here is realistic for teak, since the species arrives commercially in a well-dried state more consistently than many tropical hardwoods.
Compare against white oak, the heaviest species this site tracks at this size, or the SPF framing default at how much a 2x4 weighs. Teak is also the standout for LOW wood movement — see how much a 12-inch teak panel moves — and check other dimensions in the wood weight calculator.